 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LTR B REVISION DATE 12-06-05 APPD RM CHIP MATERIAL InGaN LENS COLOR WATER CLEAR EMISSION COLOR INCAND. WHITE Notes: 1. 2. 3. 4. 5. 6. ALL DIMS ARE IN MILLIMETERS (INCHES). TOLERANCE IS 0.25mm (.010") UNLESS OTHERWISE SPECIFIED. PROTRUDED RESIN UNDER FLANGE IS 1.0mm (.04") MAX. LEAD SPACING IS MEASURED WHERE LEADS EMERGE FROM THE PACKAGE. LEADS TO BE SOLDERABLE AND CAPABLE OF MEETING THE SOLDERABILITY REQUIREMENTS OF MIL-STD-202, METHOD 208. MANUFACTURE DATE SHALL NOT BE OLDER THAN 26 WEEKS (6 MONTHS). -PROPRIETARYR ATTENTION OBSERVE PRECAUTIONS FOR HANDLING- ELECTROSTATIC SENSITIVE DEVICES This document contains Proprietary information of LEDTRONICS, INC. It may not be copied, used or disclosed for any purpose without the prior express written consent of LEDTRONICS, INC. TM TM TITLE DWG NO DSDC316 CODE IDENT NO. 8Z410 DWG BY RM L200-0IW-40D SCALE 2:1 CHK BY PL 12-13-05 QA GZ 12-13-05 SHEET 1 OF 3 MNFG DATE 09-29-03 CUSTOMER TM .XXX .010 23105 KASHIWA COURT TORRANCE, CA 90505 .XX .025 ANGLES 0,30' FRACT. 1/32 TOLERANCE PER ANSI-Y14.5 (UNLESS OTHERWISE STATED) LTR B REVISION DATE 12-06-05 APPD RM Absolute Maximum Ratings at Ta 25 25C Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width Continuous Forward Current Derating Linear From 50C 50 C Reverse Voltage Electrostatic Discharge (ESD) Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [4mm (.157 ) From Body] (.157" MAX. 80 100 20 0.4 5 Unit mW mA mA mA/C mA/ C V 150 V -20C +80 C -20 C to +80C -30C +100 C -30 C to +100C 260C 260 C for 5 Seconds Electrical Optical Characteristics at Parameter Luminous Intensity Ta=25 =25C Typ. 2400 40 3.5 --------Max. ----4.0 100 ------Unit mcd d Deg V uA ----uW/sr Test Condition If =20mA (Note 1) (Note 2) If=20mA VR=5V ------- Symbol Iv 2 1/2 Min. --------------- Viewing Angle Forward Voltage Reverse Current SCP Lumens Radiant Intensity Vf IR ------- Color Rank LTWW Lower Left x y 0.405 0.365 Bin Limi ts (CIE1931 x, y coordinates) Lower Right Upper Right x x y y 0.460 0.435 0.375 0.436 Upper Left x y 0.425 0.427 Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. 1/2 is the off-axis at which the luminous inensity is half the axial luminous intensity. -PROPRIETARYR This document contains Proprietary TM information of LEDTRONICS, INC. It may not be copied, used or disclosed for any purpose without the prior express TM written consent of LEDTRONICS, INC. TM TITLE DWG NO DSDC316-A CODE IDENT NO. 8Z410 DWG BY RM L200-0IW-40D SCALE NTS CHK BY QA SHEET 2 OF 3 MNFG DATE 12-06-05 CUSTOMER .XXX .010 23105 KASHIWA COURT TORRANCE, CA 90505 .XX .025 ANGLES 0,30' 0 ,30' FRACT. 1/32 TOLERANCE PER ANSI-Y14.5 (UNLESS OTHERWISE STATED) LTR B REVISION DATE 12-06-05 APPD RM Typical Electrical / Optical Characteristics Curves (25C Ambient Temperature Unless Otherwise Noted) CIE 1931 Chromaticity Diagram 0.45 BIN 4 BIN 3 BIN 2 BIN 1 0.8 10 Spectral Radiance 0.43 0.41 Normalized Response 0.6 Y 0.39 0.37 0.35 0.35 0.37 0.39 0.41 0.43 0.45 0.47 0.49 0.4 0.2 0.0 380 420 460 500 540 580 620 660 700 740 780 X Wavelength (nm) Forward Current vs Forward Voltage 3 30 25 20 15 10 5 0 2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9 Relative Luminous Intensity vs Forward Current Forward Current If (mA) Relative Intensity (LOP@20mA=1) 2.5 2 1.5 1 0. 5 0 0 5 10 15 20 25 30 35 Forward Voltage Vf (V) Forward Current If (mA) Beam Pattern 0C -30C 30C Forward Current vs Derating Curve 60 50 Forward Current If (mA) 40 30 20 10 -60C 60C -90C 1.0 08 0.6 0.4 0.2 0.2 0.4 0.6 0.8 90C 1. 0 0 0 10 20 30 40 50 60 70 80 90 Relative Intensity (LO P@M AX=1) Derating Curve Ta (C) -PROPRIETARYR This document contains Proprietary TM LEDTRONICS, INC. information of It may not be copied, used or disclosed for any purpose without the prior express TM LEDTRONICS, INC. written consent of TM TITLE DWG NO DSDC316-B CODE DWG BY IDENT NO. RM 8Z410 L200-0IW-40D SCALE NTS CHK BY QA SHEET 3 OF 3 MNFG DATE 12-06-05 CUSTOMER .XXX .010 23105 KASHIWA COURT TORRANCE, CA 90505 .XX .025 ANGLES 0,30' FRACT. 1/32 TOLERANCE PER ANSI-Y14.5 (UNLESS OTHERWISE STATED) |
Price & Availability of L200-0IW-40D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |